710625

Beper 90396 Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
10
Cotton Candy Maker Use instructions
INSTRUCTION FOR USE
FIRST USE
When used for the rst time wash the bowl (1) and rotating reservoir (2) with warm water and wipe
all.
Locate the cotton candy make on a stable and horizontal surface.
Insert the bowl (1) on the motor (4).
Insert the rotating reservoir (2).
!ATTENTION!
A bad installation of the rotating reservoir (2) can alter the production of cotton candy or cause
excessive vibration.
USE
Connect the cord (7) on the socket and switch on the cotton candy maker using the switch on/off I/0
(5). Heat for about 5 minutes (the heating rods (3) lights up).
Switch of the cotton candy maker pressing the switch on/off (5) position 0.
Wait until the rotating reservoir (2) completely stops.
Put the suger inside the rotating reservoir (2) using the measuring cup (8).
!ATTENTION!
Do not put sugar inside the rotating reservoir when the device is operating.
Do not put too much sugar (please refer to the measuring cup, about 10 g of sugar), that could cause
noise and vibrations. Use white sugar. Do not use other ingredients.
Switch on the cotton candy maker using the switch on/off (5) on position I; the rotating reservoir (2)
start turning and heats with the heating rods (3).
!ATTENTION!
The rotating reservoir turns quickly and with high temperature; to avoid risks of injuries do never
touch with hands, spoons or other.
After 2-3 minutes sugar turns to cotton candy. Roll cotton candy on a wooden stick (to buy at the
supermarket).
Make the wooden stick rolls around the bowl (1).
When complete, switch off the cotton candy maker pressing the switch on/off (5) position 0.
When the cotton candy maker stops, wait until the rotating reservoir (2) completely stops before
adding sugar.
!ATTENTION!
The temperature of the rotating reservoir (2) remains hot for some minutes (about 15 minutes) after
the device stops.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 90396 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 90396 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info