Manual Beper 90041 (page 8 of 24) (English, German, French, Italian, Spanish)

710275

Zoom out

Zoom in

1/24

Electric knife Use instructions

SAFETY INSTRUCTION

- When you stop the motor, rst unplug the appliance before removing the blades and before each

cleaning operation.

- Do not leave the knife in reach of children.

- Make certain the voltage shown on the appliance corresponds to the voltage of your mains power

supply.

Any error in connecting the appliance will negate the warranty.

- If the power supply cord is damaged, it must be replaced by the manufacturer, their after-sales service or a

person with similar qualication to avoid any hazards.

- Make certain to keep the power supply cord away from the blades when using the knife.

- Do not place or use this appliance on a hot-plate or close to a ame (gas cooker).

- Disconnect the appliance after each use .

- This appliance complies with technical regulations and standards in force.

- Only use this product on a stable work surface protected against water being splashed.

- Maximum operating time:15 min.– stop:1 h.

- The appliance must be unplugged if there is a fault during operation,

- Never unplug the appliance by pulling on the cord.

- Only use an extension cord if you have already checked that it is in good working order and is suitably rated.

- A household appliance must not be used:

- If it has been dropped,

- If the knife is damaged or incomplete .

For such cases and for all other repairs, it is essential to contact an authorised service centre.

Product description Fig. 1

1 Blade rivet

2 Pair of blades

3 Blade protection

4 Blades insertion hole

5 Blades ejector

6 Safety switch

7 ON/OFF switch

USE

1 First make sure the appliance is unplugged and make certain the blades are in their protection cover (cutting

edge downwards), then introduce them gently into the motor unit and push the protections until it locks (audible

click) (g.2).

Next, carefully remove the blade protection cover.

Caution: the blades are extremely sharp. Always be careful when handling them.

2 Plug in the appliance. Start by pressing the on/off switch.

Place the blades on the food to be cut and press. Start to cut frimly from the crust or rind going down into the

food. The blades should remain parallel to the surface of the cut. Never try to cut

bones.

3 To remove the blades, unplug the appliance, then press the blade ejection button while pinching the protections

and pull to remove them from the motor unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beper 90041 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beper 90041 Manual

Product: