710407

Beper 90002 Manual

12
Zoom out
Zoom in
Previous page
1/36
Next page
Thermoelectric refrigerator Use instructions
12
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
FUNCTION
Plug the power cord into the electrical outlet.
Set the temperature by turning the adjusting knob placed inside the fridge.
The temperature cab be set in the range of 5 ° C to 15 ° C.
To reduce the internal temperature, rotate the knob from “Min” to “Max”.
At rst use, set the knob to “Max” to reduce the temperature more quickly, then adjust it to your liking.
The temperature reaches the set value at varying times depending on the room temperature and the amount of
food introduced into the refrigerator and the temperature of the refrigerator.
The best performance is obtained if the door is opened and closed as little as possible.
For optimal results, it is recommended to put in the refrigerator food and drinks already cold.
MAINTENANCE AND CLEANING
Disconnect the power cord from the electrical outlet before each cleaning operation.
Be careful not to inltrate liquids in the fridge, to avoid damaging it.
Never clean with diluents, abrasive products in general, detergents for plastic, glass or the like because could
damage the fridge.
The inside of the fridge can be cleaned with a solution of hot water and bicarbonate (2 tablespoons of bicarbo-
nate in a quarter of a liter of water). Dry all parts well.
Be careful not to wet the temperature control knob and the fan guard grid.
The outside of the fridge, shelf grids and gasket can be cleaned with a damp cloth and soap.
Periodically dry the condensed liquid in the condensate collection tray.
When not using the fridge for a long time, remove any food and drink inside the compartment, clean it and leave
the front door open for a few days.
It is important to ensure good ventilation around the fridge in order to avoid mold formation.
To change the position of the fridge, empty it completely and then move it, without tilting it over or overturning it.
TECHNICAL DATA
Power: 70W
Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 90002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 90002 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info