711078

Beper 50971 Manual

11
Zoom out
Zoom in
Previous page
1/40
Next page
ENGLISH
Steam station Use instructions
11
INSTRUCTIONS FOR USE
Before rst use, please ensure that the wattage and mains voltage correspond to the
instructions on the rating label.
Ensure that the power cord is not damaged by being crushed, kinked or scraped against
sharp edges. If the replacement of the supply cord is necessary, this has to be done by
the manufacturer or his agent in order to avoid a safety hazard.
When using the steam station for the rst time, take off the protection lm of the plate.
During the rst use, a light smoke caused by the evaporation of the protective oil applied in manu-
facture may appear; this is normal and after some use, the smoke will disappear.
The steam station may contain some residues in the boiler or steam tube. During the rst use of
the domestic iron, release the steam several times steam in order to eliminate the internal residues
Never pull the supply cord to unplug the appliance.
Do not roll up the electric cord around the iron.
Keep away to a reasonable distance the supply cord from the iron plate, especially when it is hot.
When making a break or if not used, put the iron on the iron rest in vertical position.
Do not leave the steam station plugged, without supervision.
Rell the tank with water before plugging the appliance. During lling and relling, we recommend
to unplug the appliance from the mains supply.
Do not ll the tank over his maximum capacity.
Do not ll with mixture stain-removing, vinegar, scaling or chemical agent, but use only distilled or
demineralised water.
Lay the steam station on a plane surface, stable and resistant to heat.
The plate of the iron becomes very hot, take care not to burn you.
Never direct the jet of steam towards your face.
Always choose the right temperature according the cloth which has to be ironed.
Do not use the stream station as a heater. Do not iron the wet clothes, let them dry before ironing.
Do not iron clothes when wearing them on you.
Do not pass the iron on buttons or zipper in order to not to damage the plate.
Take care not to knock the iron. Do not touch the parts of iron when this one is on and in the minutes
following the extinction to avoid any risk of burns.
Do not put the hot iron on the electric cord. Pay attention that this one does not touch the hot plate
of the iron.
Do not open the tank during the use.
Before cleaning, unplug the supply cord.
After complete cooling you can store the appliance.
If you no longer use this appliance, please keep away from children.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 50971 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 50971 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info