711107

Beper 50928 Manual

11
Zoom out
Zoom in
Previous page
1/36
Next page
11
Steam Mop Use instructions
How to assemble your steam mop
1.Remove all the parts from the packaging .
2.Push telescopic tube into body with full force and make the locking spring locked.
3.Push the mop head to the body and make the locking spring locked.
4.Place the pad on the mop head and pull the string tight.
Filling the water tank
IMPORTANT: always insure that the unit is “UNPLUGGED” from the wall receptacle prior to initial
lling and before the bottom of the mop head .never use the steam mop without the micro-ber cle-
aning pad attached to the mop head .
1.Turn the cap counter clockwise and then lift up to remove from the water tank.
2.Using the measuring cup and funnel ,pour some water into the water tank .do not overll the unit
passed the “MAX” ll line on the water tank .
3.Replace the cap onto the water tank.
Using the steam mop
IMPORTANT: Never use the steam mop without the micro-ber cleaning pad attached to the mop
head or without water in the water tank .
Warning: when water tank is empty, the pump will little pumping noise and shake, pump switch must
turn off immediately.
1.Sweep or vacuum oors before using the steam mop .
2.Twist the quick release cord holder to unwrap the power cord completely .
3.Plug into a 120-voit electrical outlet
4.Power indicator (green) turn on
5.It takes approximately 30 seconds for the unit to heat up and the steam to be ready
6.Turn on the pump switch (0-off , I- on),steam will wet micro-ber. Its normal that pump will little
noise and shake when beginning.
7.When the water tank is empty ,the pump will be little pumping noise and shake, pump switch must
be turn off immediately. .unplug the power cord from the electrical outlet and rell the water tank
following the instructions above .
8.When you have nished using the steam mop ,unplug the unit from the electrical outlet and care-
fully remove
9.Never leave the micro-ber cleaning pad on the steam mop head when you have nished using
the steam mop
Operating instructions
Always remove the micro-ber cleaning pad and wash in warm water with a mild detergent .Never
use bleach or fabric softener when washing the reusable micro-ber cleaning pad .The micro-ber
cleaning pad may be dried in a washing machine and dried in a clothes drier on low heat .We re-
commend that you air dry
IMPORTANT: Be careful when machine washing or drying with mixed fabrics as micro-ber pads
will pick up lint from other stick to other garments .we recommend washing the micro-ber cleaning
pads separately or placing them in a garment bag rst
CAUTION: never store the steam mop with a wet or damp micro-ber cleaning pad still attached as
this will damage your oors
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 50928 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 50928 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info