711103
11
Zoom out
Zoom in
Previous page
1/32
Next page
11
Robot Cleaner Use instructions
EN
Description of the appliance: Fig.A
1. Vacuum cleaner
2. Charger adaptor
3. Round brushes (2 pcs.)
4. Filter
5. Wiping cloth (2 pcs.)
Before switch on the appliance check:
(1) whether the dust collecting box is full or not. If it is full empty it.
(2) whether the sucking entrance is blocked by dust or other items, if so let it free.
(3) whether the wiping cloth is aligned with the wiping board, if not it will effect on the rotation of left and right
rear wheels.
CHARGING THE BATTERY:
Before charging, you must power off the appliance.
Charge the appliance for 6-8 hours continuously.
LED FUNCTIONS:
HOW TO DISASSEMBLE OR ASSEMBLE THE ROUND BRUSHES: Fig.B
The brushes can disassemble / assemble only by hands, without any tools.
To assemble the brushes, place the protruding shaft placed in the centre of the brush into the appropriate holes
on the base of the appliance and press slightly.
To disassemble the brushes, turn the product upside down and pull the brushes upward.
The brushes are straight before assembling once assembled will open by themselves.
HOW TO DISASSEMBLE OR ASSEMBLE WIPING BOARD AND WIPING CLOTH : Fig.C
To disassemble / assemble the wiping board and cloth no need any tools, you can do by hand.
1. Press slightly the 4 protruding pins placed on the back of the wiping board into the 4 holes placed on the
bottom of the appliance.
2. If you don’t need to use wiping cloth, please remove the wiping board .
3. Apply the wiping cloth on the wiping board by pressing on it.
4. Remove the dirty wiping cloth, and clean it by water, dry it sun than can use again. (Note: the wet wiping cloth
can’t be used, otherwise the machine can’t work.)
HOW TO CLEAN DUST COLLECTING BOX: Fig.D
1) Open the upper cover upward
2) Remove the cover
3) Remove the dust collecting box lid
4) The remove the dust collecting box
5) Remove the lter cover
6) Empty the box
HOW TO CLEAN THE FILTER AND THE DUST COLLECTING BOX: Fig.E
1) Clean the dust collecting box under the tap. Don’t wash it in the dishwasher or other cleaning machine.
2) Let it dry perfectly before install again.
3) Regularly clean the lter surface with a soft brush. Don’t wash under the tap.
Operating LED keeps blue constantly.
Operating, and the battery is nearly out. LED twinkles in blue.
Charging LED twinkles in red
The battery is full. LED keeps red constantly.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 50600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 50600 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info