711104
9
Zoom out
Zoom in
Previous page
1/32
Next page
9
Rechargeable Vacuum Cleaner Use instructions
EN
Accessories and lter must only be mounted or disassembled when the appliance is switched off. The liquid lter
should only be mounted when it is completely dry.
If the appliance overheats or produces burnt smell during use; If it produces noises other than usual, it is sugge-
sted to turn it off and check that the is not clogged.
PRODUCT AND ACCESSORIES
1. Charging station/wall holder
2. Liquid and solid container
3. Release button
4. ON / OFF switch
5. Recharge indicator led light
6. Engine Body
7. Charging adapter
8. Brush
9. Crevice nozzles
INSTRUCTIONS FOR USE
When using the appliance for the rst time, let it charge for some hours so the batteries can charge complete.
Press the release button (3), remove the liquid and solid container (2) and check that the suction lter is securely
fastened.
Insert the desired accessory into the suction nozzle.
Press the ON / OFF button (4) and vacuum the material by approaching the suction nozzle.
At the end, switch off the appliance by pressing the ON / OFF button (4) again.
Empty the container after vacuum liquids and / or solids, or when the container (2) is full, by pressing the release
button (3).
CLEANING
Switch off the appliance before cleaning it.
The outer body, the container, the suction accessories can be cleaned with a soft cloth dampened with hot water.
Do not clean with diluents, abrasive products, detergents for plastic or other; could damage the surface.
Take care not to penetrate liquids inside the slots of the appliance.
The lter can be wash by rinsing it under tap water, but before reassembling it must be completely dry.
RECHARGE
Switch off the appliance with the ON / OFF button (4).
Plug the adapter plug into an AC 230 V - 50 Hz AC socket.
The charging LED (5) on the body lights up signaling the charging phase.
Do not recharge for more than 8-10 hours.
When charging is complete, disconnect the plug and store the base in a dry place.
For charging use only the supplied original adapter and do not modify the power cord or any other part of the
adapter.
TECHNICAL DATA
Power: 60W
Mains adapter:
Output DC 7.2V
Input AC 230-240V ~ 50Hz
Battery: AA Ni-MH 7.2V 1400mAh
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 50400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 50400 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info