Manual Beper 50240 (page 8 of 28) (English, German, French, Italian, Spanish)

711095

Zoom out

Zoom in

1/28

Lint Remover Use instructions

CHILDREN SHOULD BE SUPERVISED TO ENSURE

THAT THEY DO NOT PLAY WITH THE APPLIANCE.

KEEP CHILDREN WELL AWAY FROM PACKAGING

MATERIALS, AS THERE IS A POTENTIAL SOURCE

OF DANGER E.G. FROM SUFFOCATION.

No responsibility will be accepted if damage results from improper

use, or if these instructions are not complied with.

This appliance is intended for domestic use only and not for commer-

cial applications.

In order to comply with safety regulations and to avoid hazards, re-

pairs of electrical appliances must be carried out by qualied per-

sonnel. If repairs are needed, please send the appliance to one of

our customer service departments. The address can be found in the

appendix to this manual.

PRODUCT DESCRIPTION Fig.1

1. Protective cover

2. Suction grille with frontal ferrule

3. Rotating blades

4. Rotation pin

5. Ergonomic housing

6. On-/Off switch

7. Lint container

8. Battery cover

BATTERY INSTALLATION

Remove the battery cover by pull it down.

Insert 2xAA alkaline batteries in the battery compartment following the battery direction sign as imprinted.

Close the battery cover until the cover clicks into place and locks.

INSTRUCTIONS FOR USE Fig.A

The lint remover must be used to remove unsightly hair, lint and wool balls from skirts, sweaters, jackets, trou-

sers, blankets or other clothing in general.

Warning: do not remove the lint directly from the garments while wearing.

Pay attention to buttons, zips, signs, stitching and other elements in the garment.

It is advisable to make a test by passing the lint remover into invisible parts of the garment.

Press the ON / OFF operation button.

Gently wipe the lint remover on the surface of the garments one or more times until completely smoothed.

Once the operation is completed, switch off the lint remover by pressing the ON / OFF switch and reposition the

protective cover.

If the fabric is very light, it is advisable to fold it into two parts before removing the lint.

The product is equipped with a safety system that will not let operate the product if the ferrule is not positioned

correctly.

N.B. It is advisable to pass the lint remover on the fabrics by following the weave of the fabric itself.

LINT REMOVER CLEANING Fig. B-C

Before cleaning the lint remover make sure it is turned off.

Remove the suction grille with the frontal ferrule by turning anti-clockwise.

Remove the rotating blades very carefully, as they are sharp.

Clean the rotating blades and the back of the suction grille by using the special brush supplied.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beper 50240 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beper 50240 Manual

Product: