711093

Beper 50200 Manual

9
Zoom out
Zoom in
Previous page
1/32
Next page
9
Travelling iron Use instructions
EN
INSTRUCTION FOR USE:
SETTING THE TEMPERATURE
• • • MAX High temperature steam ironing (cotton, linen)
• • Medium temperature ironing (wool, silk)
• Low temperature ironing (synthetic bres)
Before starting to iron, run the iron over a small hidden area of your garment to make
sure the temperature selected is suitable to the type of fabric.
FILLING THE TANK (only in case of steam ironing)
• Always make sure the plug is disconnected from the power outlet when lling the tank.
• Lift the handle (as shown in gure)
• Place the iron at an angle.
• Open the lid and ll the tank without going over the MAX level indicated.
Never place perfumed substances in the tank.
• Close the lid.
USE
Start-up:
1. Place the iron in a vertical position, completely unwind the power cord and connect the
plug to the power outlet.
2. With the temperature control dial select the temperature most suitable to the type of fabric to iron.
3. The thermostat light will turn on. It will then turn off when the selected temperature is reached. The iron is now
ready to use.
The iron can be used for dry or steam ironing.
To iron with steam proceed as follows:
1. Fill the tank as indicated in the appropriate paragraph.
2. Place the iron in a vertical position, completely unwind the power cord and connect the plug to the power
outlet.
3. Use the tempeature control dial to select the temperature ••• MAX.
4. The thermostat light will turn on. It will then turn off when the selected temperature is reached. The iron is now
ready to use.
5. During ironing press the steam button in pulses to obtain a jet of steam.
Note:
• Do not press the button too many times in succession to prevent non-vaporised
drops of water from leaking.
• Drops of water may be discharged together with the steam on rst use. This is
normal. Before ironing your linen, carry out tests on old pieces of fabric.
• Mineral particles may be discharged at each use of the steam function, therefore do
not discharge the rst jets of steam directly onto the items to iron.
CLEANING AND MAINTENANCE
Before carrying out any cleaning operation, disconnect the plug from the power outlet and wait for the iron to
completely cool down.
• Clean the body of the iron with a soft dry cloth.
• Regularly clean the soleplate using a normal non-abrasive sponge to keep the surface of the soleplate from
damaging.
• Do not use chemical or abrasive substances.
• Never immerse the appliance in water or other liquids.
• Empty the tank after each use.
• Let the iron cool down completely before store it.
• Before storing the iron, press the button to lower the handle.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 50200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 50200 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info