711092

Beper 50132 Manual

18
Zoom out
Zoom in
Previous page
1/64
Next page
18
Steam iron Use instructions
The light indicator (7) illuminate and when the soleplate is at good temperature switch off.
Pressing the steam switch (4), steam function is activated.
Set the temperature indicator at least on position “•••”.
Wait 5 seconds between steam spray and the one other after.
If steam switch (4) is pressed before reaching the setting temperature, steam func-
tion won’t work but only water drops; that could stain clothes.
Water drops may result of a non-stop pressure of steam switch (4), by more than 5 se-
conds.
To obtain a non-stop steam, keep steam indicator (3) in position
ATTENTION : always direct the steam to clothes and not in direction of face.
When nished using the iron, unplug the appliance and empty the tank water.
WATER SPRAY
Check that the tank (2) is full of water, direct the spray (1) forward the clothes. Press se-
veral times the water switch (5).
When used for the rst time, it is recommended to press several times on water switch (5)
before you obtain the desired spray.
Attention: do not use water spray function on silk.
DRY IRONING
Set the steam indicator (3) on in order to not to use steam function. Set the soleplate
temperature by using the thermostat (8).
The light indicator (7) illuminates and switch off when the soleplate is at good temperature.
Start ironing after iron reached desired temperature.
Please note that the soleplate reached lower temperatures when used without steam.
FILL AND EMPTY THE TANK
This has to be made only when the appliance is unplugged.
Always dry the iron or hands before unplug the appliance after lling the tank.
Make sure the temperature indicator (8) is on “min” and steam indicator (3) is on .Rai-
se the tank lid (2) and slowly ll using a funnel
Do not exceed the maximum limit of the tank.
Do not introduce water into the iron, because of electric shock risks. Close the tank lid (2)
when is full and plug the appliance to the socket.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 50132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 50132 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info