710741

Beper 40502 Manual

9
Zoom out
Zoom in
Previous page
1/32
Next page
9
Foot massager Use instructions
EN
How to Use
Ensure that the unit is unplugged before lling with water. Fill the Foot Massager up with warm water.
Plug in and switch on by pushing the ON/OFF button. Sit down and place your feet in the Foot Mas-
sager to start the massaging experience. If you want slightly move your feet forward and backward
over the massaging zone. Place the foot base on the accessory for plantar massage.
To empty: rst, turn all controls to the ‘OFF’ position , then unplug the unit. Tip the unit allowing water
to spill out along the drain hole.
Attention: Never pour water over the ON/OFF button.
Cleaining and maintenance
Unplug the unit and allow it to cool before cleaning. Clean only with a soft, damp cloth.
Never allow water or any other liquid to come into contact with the control switch.
After cleaning, wipe surfaces with a dry cloth. Never use abrasives, detergents or cleaning agents.
For a convenient storage, unplug the appliance from the outlet and allow cooling. Store in its box or
a clean, dry place.
To avoid breakage, do not wrap the power cord around the unit. Do not hang the unit by the power
cord.
This appliance is designed for household use only.
Technical Data
Power: 60 W
Power supply: 220-240V~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 40502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 40502 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info