648966
10
Zoom out
Zoom in
Previous page
1/24
Next page
10 Installation
Installation
This section will guide you on how to prepare the unit before its initial use.
As your Wireless FHD Kit could work with different projectors, the steps required to complete the
installation may vary according to actual environment and your projector specifications. Follow the
procedures below and refer to the specified sections for details.
1. Connect the transmitter to the desired devices and power properly. See Setting up the transmit-
ter (Tx) on page 10 for details.
2. Attach the receiver to your projector and connect power. See Setting up the receiver (Rx) on
page 12 for details.
3. Make sure that all the connected devices have been powered on. Press the source button of the
projector or of its remote control to select the appropriate HDMI video output, and make sure
that the source has been transmitted. See Powering up all devices and making source selection
on page 16 for details.
4. In most cases, you should be able to control the source devices by pointing their remote control
to the receiver. If the source device does not respond, perform IR sync by following instructions
in Performing IR sync on page 17.
Setting up the transmitter (Tx)
Connect up to four high-definition audio/video sources to the transmitter.
1. Connect the transmitter’s HDMI 1/HDMI 2/HDMI 3/HDMI 4 jacks to the high-definition AV equip-
ment’s HDMI out jacks via HDMI cables. The transmitter is equipped with four HDMI jacks for
the high-definition equipment such as Blu-ray Players or video game consoles.
1
2
3
USB
HDMI
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ WDP02 - Wireless FHD Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ WDP02 - Wireless FHD Kit in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ WDP02 - Wireless FHD Kit

BenQ WDP02 - Wireless FHD Kit User Manual - German - 24 pages

BenQ WDP02 - Wireless FHD Kit User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info