648964
63
Zoom out
Zoom in
Previous page
1/72
Next page
Troubleshooting 63
Troubleshooting
Problem Cause Remedy
The projector does
not turn on.
There is no power from the power
cable.
Plug the power cord into the AC inlet
on the projector, and plug the power
cord into the power outlet. If the power
outlet has a switch, make sure that it is
switched on.
Attempting to turn the projector on
again during the cooling process.
Wait until the cooling down process has
completed.
The lamp cover is not securely attached. Correctly attach the lamp cover.
No picture.
The video source is not turned on or
connected correctly.
Turn the video source on and check that
the signal cable is connected correctly.
The projector is not correctly
connected to the input signal device.
Check the connection.
The input signal has not been correctly
selected.
Select the correct input signal with the
SOURCE key on the projector or
remote control.
Image is unstable.
The connection cables are not securely
connected to the projector or the signal
source.
Correctly connect the cables to the
appropriate terminals.
Picture is blurred.
The projection lens is not correctly
focused.
Adjust the focus of the lens using the
focus ring.
The projector and the screen are not
aligned properly.
Adjust the projection angle and direction
as well as the height of the unit if
necessary.
The lens cover is still closed. Remove the lens cover.
Remote control
does not work.
The battery is out of power. Replace the battery with new one.
There is an obstacle between the
remote control and the projector.
Remove the obstacle.
You are too far away from the projector.
Stand within 7 meters (23 feet) of the
projector.
3D content does
not display correctly.
The 3D glasses are out of battery. Recharge the 3D glasses.
The settings in the 3D menu are not set
correctly.
Correctly set the settings in the 3D
menu.
Your Blu-ray Disc is not in 3D format. Use a 3D Blu-ray Disc and try again.
The input source has not been correctly
selected.
Select the correct source with the
SOURCE key on the projector or
remote control.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W8000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W8000 in the language / languages: English as an attachment in your email.

The manual is 23,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W8000

BenQ W8000 User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info