648964
49
Zoom out
Zoom in
Previous page
1/72
Next page
Operation 49
High Altitude Mode
It is a mode for operation in areas like high altitude or high temperature. Activate
the function when your environment is between 1500m – 3000m above sea level
and ambient temperature is between 0°C–30°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500
m and temperature is between 0°C and 30°C. The projector will be over
cooled, if you turn the mode on under such a condition.
Operation under High Altitude Mode may cause a higher decibel operating
noise level because of increased fan speed necessary to improve overall system
cooling and performance.
If you use this projector under other extreme conditions excluding the above, it
may display auto shut-down symptoms, which is designed to protect your
projector from over-heating. In cases like this, you should switch to High Altitude
mode to solve these symptoms. However, this is not to state that this projector
can operate under any and all harsh or extreme conditions.
Password
For security purposes and to prevent unauthorized use, you may set up password
security for the projector. See "Utilizing the password function" on page 35 for
details.
•Change Password
You will be asked to enter the current password before changing to a new one.
•Power On Lock
Limits use of the projector to only those who know the correct password.
Key Lock
With the control keys on the projector locked, you can prevent your projector
settings from being changed accidentally (by children, for example).
When you select On to enable this function, no control keys on the projector will
operate, except POWER.
To unlock the keys, press and hold on the projector for 3 seconds.
12V Trigger Enable or disable 12V Trigger signal output.
LED Indicator
When you select On, all LED indicators on the projector function normally. See
"Indicators" on page 62 for more details.
When you select Off, the LED indicators are off after you turn on the projector
and the splash screen displays. However, if the projector is not working properly,
the LED indicators light or flash to remind you that a problem may occur. See also
"Indicators" on page 62 for more details.
Reset All Settings
Returns all settings to the factory preset values.
The following settings will still remain: ISF, Reset Lamp Timer,
Power On Lock, High Altitude Mode, Password.
ISF
The ISF calibration menu is password protected and only accessible by authorized
ISF calibrators. The ISF (Imaging Science Foundation) has developed carefully
crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these
standards to obtain optimal picture quality from BenQ video display devices.
Accordingly, we recommend that setup and calibration be performed by an ISF
certified installation technician.
For more information, please go to www.imagingscience.com or contact
the place you purchased the projector.
Submenu Functions and Descriptions
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W8000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W8000 in the language / languages: English as an attachment in your email.

The manual is 23,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W8000

BenQ W8000 User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info