648964
30
Zoom out
Zoom in
Previous page
1/72
Next page
Operation30
Operation
Starting up the projector
1. Plug the power cord into the projector and into a
wall socket. Turn on the wall socket switch
(where fitted). Check that the POWER
indicator light on the projector lights orange
after power has been applied.
Please use the original accessories (e.g. power cable) only
with the device to avoid possible dangers such as electric
shock and fire.
2. Press POWER on the projector or remote control to start the projector.
The POWER indicator light flashes green and stays green when the projector is
on.
The fans starts operating, and a start-up image display on the screen while it warms
up. The projector does not respond to further commands whiles it is warm up.
(If necessary) Rotate the focus ring to adjust the image clearness.
If the projector is still hot from previous activity, it will run the cooling fan for approximately 90
seconds before energizing the lamp.
3. If this is the first time you turn on the projector or after “Reset All Setting”, the
setup wizard appears to guide you through setting up the projector. If you have
already done this, skip this step and move on to step 5.
Use the arrow keys (///) on the projector or remote control to move
through the menu items.
Use OK to confirm the selected menu item.
The Setup Wizard screenshots below are for reference only and may differ from the actual
design.
i. Specify Projector Position.
For more information about
projector position, see "Choosing a
location" on page 16.
ii. Specify OSD Language.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W8000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W8000 in the language / languages: English as an attachment in your email.

The manual is 23,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W8000

BenQ W8000 User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info