648967
52
Zoom out
Zoom in
Previous page
1/60
Next page
52
Using the projector
Troubleshooting
Problem Cause Remedy
The projector does
not turn on.
There is no power from the power
cable.
Plug the power cable into the AC inlet on the
rear of the projector, and plug the power
cable into to the power outlet. If the power
outlet has a switch, make sure that it is
switched on. (See page 20.)
Attempting to turn the projector on
again during the cooling process.
Wait until the cooling down process has
completed.
The lamp cover is not securely
attached.
Correctly attach the lamp cover. (See page
48.)
No picture.
The video source is not turned on or
connected correctly.
Turn the video source on and check that the
signal cable is connected correctly. (See page
17.)
The projector is not correctly
connected to the input source device.
Check the connection. (See page 17.)
The input source has not been
correctly selected.
Select the correct input source with the
Source keys on the remote control or
SOURCE on the projector. (See page 21.)
Image is unstable.
The connection cables are not
securely connected to the projector
or the signal source.
Correctly connect the cables to the
appropriate terminals. (See page 17.)
Picture is blurred.
The projection lens is not correctly
focused.
Adjust the focus of the lens using the focus
ring. (See page 21.)
The projector and the screen are not
aligned properly.
Adjust the projection angle and direction as
well as the height of this projector if
necessary. (See page 25.)
Remote control does
not work correctly.
The batteries are out of power.
Replace both of the batteries with new ones.
(See page 7.)
There is an obstacle between the
remote control and the projector.
Remove the obstacle. (See page 7.)
You are too far away from the
projector.
Stand within 8 meters (26.2 feet) of the
projector. (See page 7.)
3D content does not
not display correctly
The 3D glasses are out of battery. Recharge the 3D glasses.
The settings in the 3D menu are not
set correctly.
Correctly set the settings in the 3D menu.
(See page 37.)
Your Blu-ray Disc is not in 3D
format.
Use a 3D Blu-ray Disc and try again.
The input source has not been
correctly selected.
Select HDMI 1/ HDMI 2 with the Source
keys on the remote control or SOURCE on
the projector. (See page 21.)
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W7500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W7500 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W7500

BenQ W7500 User Manual - German - 66 pages

BenQ W7500 User Manual - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info