468774
26
Zoom out
Zoom in
Previous page
1/69
Next page
Operation26
English
Operation
Starting up the projector
1. Plug the power cord into the projector and
into a wall socket. Turn on the wall socket
switch (where fitted). Check that the
POWER indicator light on the projector
lights orange after power has been applied.
Please use the original accessories (e.g. power
cable) only with the device to avoid possible
dangers such as electric shock and fire.
2. Press POWER on the projector or
remote control
to start the projector
and a start up tone sounds. The POWER
indi
cator light flashes green and stays
green when the projector is on.
The start up procedure takes about 30
seconds. In the later stage of start up, a
startup logo is projected.
(If necessary) Rotate the focus ring to
adj
ust the image clearness.
To turn off the ring tone, see "Turning off the Power on/off ring tone" on page 44 for details.
If the projector is still hot from previous activity, it will run the cooling fan for approximately 90
seconds before energizing the lamp.
3. To use the OSD menus, please set them to your familiar
language first. See "Personalizing the projector menu
display" on page 45 for details.
Please select language
Press Enter to confirm, Exit to leave
4. If you are prompted for a password, press the arrow keys
to enter a five digit password. See "Utilizing the
password function" on page 28 for details.
5. Switch all of the connected equipment on.
6. The projector will start to search for input signals. The
c
urr
ent input signal being scanned displays in the upper left corner of the screen. If the
projector doesn't detect a valid signal, the message 'No Signal' will continue displaying
until an input signal is found.
You c an a l s o pre s s SOURCE o
n the projector or remote control to select your desired
input signal. See "Switching input signal" on page 31 for details.
If the frequency/resolution of the input signal exceeds the projector's operating range, you will
see the message 'Out of Range' displayed on a blank screen. Please change to an input signal
which is compatible with the projector's resolution or set the input signal to a lower setting.
See "Timing chart" on page 65 for details.
To maintain the lamp life, once you turn the projector on, wait at least 5 minutes before turning
if off.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W700 in the language / languages: English as an attachment in your email.

The manual is 12,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W700

BenQ W700 User Manual - German - 69 pages

BenQ W700 User Manual - Dutch - 69 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info