468774

BenQ W700 Manual

17
Zoom out
Zoom in
Previous page
1/69
Next page
Positioning your projector 17
English
How to determine the position of the projector for a
given screen size
1. Select your screen size.
2. Refer to the table and find the closest match to your screen size in the left columns
la
belled "16:9 screen". Using this value, look across this row to the right to find the
corresponding average distance from screen value in the column labelled "Average".
This is the projection distance.
3. On that same row, look across to the right column and make note of the "Vertical offset
in mm" value. This will determine the final vertical offset placement of the projector in
relation to the edge of the screen.
4. The recommended position for the projector is aligned perpendicular to the
ho
rizontal center of the screen, at the distance from the screen determined in step 2
above, and offset by the value determined in step 3 above.
For example, if you are using a 120-inch screen,
the W700 average projection distance is 4325 mm and with a vertical offset of 269 mm.
the W710ST average projection distance is 2004 mm and with a vertical offset of 269 mm.
If you place the projector in a different position (to that recommended), you will have to tilt
it down or up to center the image on the screen. In these situations, some image distortion
will occur. Use the Keystone function to correct the distortion. See "Correcting keystone" on
page 33 for details.
How to determine the recommended screen size for a
given distance
This method can be used for situations where you have purchased this projector and would
like to know what screen size will fit in your room.
The maximum screen size is limited by the physical space available in your room.
1. Measure the distance between the projector and where you want to position the
s
creen. This is the projection distance.
2. Refer to the table and find the closest match to your measurement in the average
di
stance from screen column labelled "Average". If the min and max values are
available on the table, check that your measured distance is between the min and max
di
stances listed on either side of the average distance value.
3. Using this value, look across that row to the left to find the corresponding screen
d
iagonal listed in that row. That is the projected image size of the projector at that
projection distance.
4. On that same row, look across to the right column and make note of the "Vertical offset
in mm" value. This will determine the final placement of the screen in relation to the
horizontal plane of the projector.
For example,
W700: if your measured projection distance was 3.5 m (3500 mm), the closest match
in t
he "Average" column is 3604 mm. Looking across this row shows that a
100-inch screen is required.
W710ST: if your measured projection distance was 1.5 m (1500 mm), the closest
ma
tch in the "Average" column is 1670 mm. Looking across this row show
that a 100-inch screen is required.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W700 in the language / languages: English as an attachment in your email.

The manual is 12,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W700

BenQ W700 User Manual - German - 69 pages

BenQ W700 User Manual - Dutch - 69 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info