648878
49
Zoom out
Zoom in
Previous page
1/79
Next page
Menu Functions 49
Advanced...
Color Management
In most installation situations, color management will not be necessary, such as in
classroom, meeting room, or lounge room situations where lights remain on, or
where building external windows allow daylight into the room.
Only in permanent installations with controlled lighting levels such as boardrooms,
lecture theaters, or home theaters, should color management be considered.
Color management provides fine color control adjustment to allow for more
accurate color reproduction.
Proper color management can only be achieved under controlled and
reproducible viewing conditions. You will need to use a colorimeter (color light
meter), and provide a set of suitable source images to measure color
reproduction. These tools are not provided with the projector, however, your
projector supplier should be able to provide you with suitable guidance, or even
an experienced professional installer.
The Color Management provides six sets (RGBCMY) of colors to be adjusted.
When you select each color, you can independently adjust its range and saturation
according to your preference.
1. Press OK and the Color Management page displays.
2. Highlight Primary color and press / to
select a color from among Red, Green,
Blue, Cyan, Magenta and Yellow.
3. Press to highlight Hue and press / to
select its range. Increase in the range will
include colors consisted of more proportions
of its two adjacent colors. Please refer to the
illustration to the right for how the colors
relate to each other.
For example, if you select Red and set its
range at 0, only pure red in the projected
picture will be selected. Increasing its range will include red close to yellow
and red close to magenta.
4. Press to highlight Saturation and adjust its values to your preference by
pressing /. Every adjustment made will reflect to the image immediately.
For example, if you select Red and set its value at 0, only the saturation of
pure red will be affected.
5. Press to highlight Gain and adjust its values to your preference by pressing
/. The contrast level of the primary color you select will be affected.
Every adjustment made will reflect to the image immediately.
6. Repeat steps 2 to 5 for other color adjustments.
7. Make sure you have made all of the desired adjustments.
8. Press OK and BACK to exit and save the settings.
Noise Reduction
Reduces electrical image noise caused by different media players. The higher the
value, the less the noise.
Submenu Functions and Descriptions
Red
Yellow
Green
Cyan
Magenta
Blue
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W3000 in the language / languages: English as an attachment in your email.

The manual is 18,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W3000

BenQ W3000 User Manual - German - 79 pages

BenQ W3000 User Manual - Dutch - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info