648878
38
Zoom out
Zoom in
Previous page
1/79
Next page
Menu Functions38
3D Sync Invert
When your 3D image is distorted, enable this function to switch between
the image for the left eye and the right eye for the more comfortable 3D
viewing experience.
The function is accessible through the remote control.
Settings Press OK to enter its submenu. See below for more details.
3D Sync Mode Selects a sync mode for your 3D glasses.
•Projector
Position
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See "Choosing a location" on page 16 for details.
Test Pattern
Enables this function to display the grid test pattern, which helps you
adjust the image size and focus so as to check if the projected image is
free of distortion.
Auto Source
Search
Sets whether the projector searches automatically for input sources.
Select On to enable the projector to scan for input sources until it
acquires a signal. If the function is set to Off, the projector selects the
last used input source.
Menu Type Switches to the Advanced OSD menu.
•HDMI Format
Selects an input source type for the HDMI signal. You can also manually
select the source type. The different source types carry different
standards for the brightness level.
HDMI Format is only available when the HDMI signal is selected.
•Reset Lamp
Timer
Activates this function only after a new lamp is installed. When you select
Reset, a "Reset Successfully" message displays to notify that the lamp
time has been reset to "0".
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Language,
Projector Position, and Reset Lamp Timer.
•Information
Displays the following information about your projector.
Source: Displays the current signal source.
Picture Mode: Displays the current Picture Mode.
Resolution: Displays the native resolution of the input source.
Color System: Displays input system format.
Lamp Usage Time: Displays the number of hours the lamp has
been used.
3D Format: Displays the current 3D mode.
3D Format is only available when 3D Mode is enabled.
Firmware Version: Displays the firmware version of your
projector.
Some information is given only when certain input sources are in
use.
Menu Submenus and Descriptions
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W3000 in the language / languages: English as an attachment in your email.

The manual is 18,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W3000

BenQ W3000 User Manual - German - 79 pages

BenQ W3000 User Manual - Dutch - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info