648962
52
Zoom out
Zoom in
Previous page
1/63
Next page
52
Maintenance
Indicators
There are three indicators which show the status of the projector. Check the following information
about the indicator lights. If there is anything wrong, turn the projector off and contact your dealer.
15. Connect the power and restart the projector.
16. After the startup logo is displayed, reset the lamp timer via the OSD menu.
• Under the Advanced OSD menu, go to System Setup : Advanced > Lamp Settings > Reset
Lamp Timer, and select Reset.
• Under the Basic OSD menu, if there’s no signal connected to the projector, go to Reset Lamp
Timer and select Reset; if there are signals connected, go to Settings > Reset Lamp Timer,
and select Reset.
Do not reset if the lamp is not new or replaced as this could cause damage.
A "Reset Successfully" message is displayed to notify that the lamp time has been reset to "0".
Light
Status & Description
Power events
Orange Off Off
Stand-by mode
Green
Flashing
Off Off
Powering up
Green Off Off
Normal operation
Orange
Flashing
Off Off
Normal power-down cooling
Red Red Red
Downloading
Green Off Red
CW start fail
Red Off Red
Scaler reset fail
Green Off Off
Burn-in ON
Green Green Green
Burn-in OFF
Lamp events
Off Off Red
Lamp1 error in normal operation
Off Off
Orange
Flashing
Lamp is not lit up
Thermal events
Red Red Off
Fan 1 error (the actual fan speed is ±25% outside the desired
speed)
Red
Red
Flashing
Off
Fan 2 error (the actual fan speed is ±25% outside the desired
speed)
Red Green Off
Fan 3 error (the actual fan speed is ±25% outside the desired
speed)
Red
Green
Flashing
Off
Fan 4 error (the actual fan speed is ±25% outside the desired
speed)
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W2000W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W2000W in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W2000W

BenQ W2000W User Manual - German - 69 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info