648898
18
Zoom out
Zoom in
Previous page
1/63
Next page
18
Connection
Connecting a wireless Full HD Kit (WDP02)
The next generation of Wireless Full HD kit is available from the place you purchased the projector.
The projector is designed to accommodate a receiver by which the projector receives a signal from a
transmitter and displays transmitted images. Refer to the illustrations below for a quick connection of the
wireless transmission device.
1. Turn the power off and disconnect the
projector from the power outlet. If the lamp
is hot, avoid burns by waiting for
approximately 45 minutes until the lamp has
cooled.
6. Connect appropriate AV equipment to the
transmitter.
7. Power on the projector and switch to the
HDMI3/MHL input source.
8. For more operation details, refer to the user
manual of the Wireless Full HD Kit (WDP02).
There will be customized firmware released for the
W2000 after the WDP02 is launched in 2016. It will
provide more integrated functions to operate the
WDP02 along with the W2000. Please contact your
local BenQ service center to update the firmware of
your projector should you need it.
2. Loosen the screws that secure the lamp
cover on the top of the projector until the
lamp cover loosens.
3. Remove the lamp cover from the projector.
4. Place the receiver into the compartment, and
press it backwards and then downwards until
it clicks into place.
5. Plug the HDMI cable and USB Mini-B cable to
the receiver.
Do not strain the HDMI cable and USB cable
as this could cause malfunction to the cables.
* About the HDMI cable
The HDMI cable is also compatible with MHL
devices. You need just to use an HDMI female to
female adaptor (shorter than 4.0 cm) and a wireless
MHL smart dongle (shorter than 7.9 cm) (e.g. Roku
streaming stick). The projector is ready to project
streaming video from the dongle wirelessly. Note
that if the projector’s firmware is updated to the
customized version as mentioned above, the HDMI
cable will not be compatible with MHL devices.
3
1
2
1
2 2
1
2
2
1
4.
6
cm
cm
10
.
2
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W2000 in the language / languages: English as an attachment in your email.

The manual is 7,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W2000

BenQ W2000 User Manual - German - 71 pages

BenQ W2000 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info