648970
53
Zoom out
Zoom in
Previous page
1/63
Next page
53
Important safety instructions
Resetting the lamp timer
Do not reset the lamp timer if the lamp has not been replaced as this could cause damage.
14. After the start-up logo, press MENU/EXIT and then press / until the Advanced Setup menu
is highlighted.
15. Press to highlight Lamp Settings and press MODE/ENTER. The Lamp Settings page displays.
16. Highlight Reset Lamp Timer and press MODE/ENTER. A warning message displays asking if you
want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp time will be
reset to "0".
7. Use the handle to slowly pull lamp housing out of the
projector.
Pulling it too quickly may cause the lamp to break and scatter
broken glass in the projector.
Do not place the lamp in locations where water might splash on
it, children can reach it, or near flammable materials.
Do not insert your hands into the projector after the lamp is
removed. If you touch the optical components inside, it could
cause color unevenness and distortion of the projected images.
8. Carefully lower the new lamp housing to slide it from left to
right into the lamp compartment, as illustrated.
Be careful not to damage the sides of the new lamp housing
while lowering the whole assembly.
9. Tighten the screw that secures the lamp.
10. Ensure the handle is fully laid flat and locked in place.
Loose screw may cause a bad connection, which could result in
malfunction.
Do not over tighten the screw.
11. Replace the lamp cover on the projector.
Please be notified that due to product improvement, the
replacement lamp does not come with new protection film. If you
would like to place the new protection film in the lamp
compartment after installing the new lamp, please purchase it
separately.
12. Tighten the screw that secures the lamp cover.
Loose screw may cause a bad connection, which could result in
malfunction.
Do not over tighten the screw.
13. Connect the power and restart the projector.
2
2
1
1
1
2
2
3
1
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W1400 in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W1400

BenQ W1400 User Manual - German - 70 pages

BenQ W1400 User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info