648970
30
Zoom out
Zoom in
Previous page
1/63
Next page
30
Important safety instructions
Advanced picture quality controls
There are more advanced functions in the Picture -- Basic > Advanced... and Display menus to be
adjusted to your preference. To save the settings, just press MENU/EXIT to leave the OSD menu.
Setting Black Level
Highlight Black Level in the Picture -- Basic > Advanced... menu and press / on the projector
or remote control to select 0 IRE or 7.5 IRE.
The grayscale video signal is measured in IRE units. In some areas which use NTSC TV standard, the
grayscale is measured from 7.5 IRE (black) to 100 IRE (white); however, in other areas where PAL
equipment or Japanese NTSC standards are used, the grayscale is measured from 0 IRE (black) to 100 IRE
(white). We suggest that you check the input source to see if it is with 0 IRE or 7.5 IRE, then select
accordingly.
Controlling image clarity
You may have static or noisy projected pictures.
To achieve better picture clarity:
1. Highlight Clarity Control in the Picture -- Basic > Advanced... menu and press MODE/
ENTER on the projector or remote control to display the Clarity Control page.
2. Press / to select the item you want and press / to set the desired value.
Noise Reduction: Reduces electrical image noise caused by different media players. The higher
the setting, the less the noise.
Detail Enhancement: Sharpens the image. The higher the setting, the more details the image
reveals.
Setting a preferred color temperature
To set a preferred color temperature:
1. Highlight Color Temperature in the Picture -- Basic menu or press COLOR TEMP on the
remote control to select Lamp Native, Warm, Normal, or Cool by pressing / on the
projector or remote control.
2. Highlight Color Temperature Fine Tuning in the Picture -- Basic > Advanced... menu and
press MODE/ENTER or press FINE TUNE on the remote control. The Color Temperature
Fine Tuning page displays.
3. Press / to highlight the item you want to change and adjust the values by pressing / .
Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue.
Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue.
4. To save and leave the settings, press MENU/EXIT.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ W1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ W1400 in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ W1400

BenQ W1400 User Manual - German - 70 pages

BenQ W1400 User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info