140938
37
Zoom out
Zoom in
Previous page
1/48
Next page
On-Screen Display (OSD) menu 35
English
2. If the Country menu item is set to Other, you should press or to select a TV standard
according to your region.
3. Press to highlight Selected PR and then press the program selection buttons on the remote
control to input the TV program you want to set up.
4. Press to highlight Frequency and then press or to start the tuning system. If the tuned
program is incorrect, pressor again until your desired program is located. You can
directly input the frequency using the numeric keys if you wish.
5. Press to highlight Fine Tune and then press or to adjust the reception of TV signal
(only necessary where the image or sound reception is poor).
6. If the SCART signal input is connected, press to highlight Decode and then pressor to
select from the following options:
On: Select this option if an external decoder Set-Top-Box (STB) is being used.
Off: Select this option if no external decoder STB is being used.
7. Press to highlight Text Code and then press or to select a code format for the Teletext
function.
8. Press to highlight Store on Prog. and then press OK to save this program to the TV
program memory.
9. Press MENU to close the menu.
Editing programs
You can delete unwanted programs, add a program name and change the program position
number.
This option is not possible when the Child Lock is activated. See "Child Lock" on page 36.
Naming a program
1. In the TV menu, press or to select Program Edit and then press OK. The following
Program Edit menu will appear.
2. Press to select Selected PR, and then press the program selection buttons on the remote
control to select the program you wish to name.
3. Press to highlight Edit Name then press OK.
4. Press orto highlight the character you want to edit, and then press or to change it
to your desired character.
5. Repeat step 4 to edit other characters.
6. Press OK to store the name.
7. Press MENU to close the menu.
Swapping programs
1. In the TV menu, press or to select Program Edit and then press OK.
2. Press to select Selected PR, and then press the program selection buttons on the remote
control to select the program you wish to relocate to a different position.
3. Press to highlight PR Swap, and then press the program selection buttons on the remote
control to select the new location for the program. Two digit entry is required. For example,
Selected PR 12
Edit Name ------
PR Swap 01
PR Lock Off
PR Delete
Back
BACK
Program Edit
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ vl3735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ vl3735 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info