140938
21
Zoom out
Zoom in
Previous page
1/48
Next page
Using the remote control 19
English
Using the remote control
Power on and standby
Turning on the T V
After plugging the TV's power cable into a wall outlet and turning on the main power switch,
the TV will enter standby mode automatically. The power indicator will light up red.
Press (Power/standby) on the TV, or Power/standby on the remote control. The TV will
turn on and the power indicator will change to green.
Putting the TV to standby
Press (Power/standby) on the TV, or Power/standby on the remote control again, and the
TV will return to standby mode. The power indicator will turn red.
Switching inputs
1. Turn on all connected equipment or devices before selecting an input.
2. Press INPUT on the TV, or Input on the remote control to display the current selected
input. Press the button repeatedly until your desired input is displayed. The sequence is as
follows:
If you have just switched from a different input source to the current one, you can press Recall
on the remote control to toggle between the current and previous viewed input sources.
• AV3-S and AV4-S will appear only when the S-Video input signal is connected to these inputs.
• DVI and HDMI inputs share the same input option "HDMI".
Adjusting volume
Adjusting volume
•Press (Volume)on the TV, or Volume + on the remote control to increase volume.
The volume indicator will increase in length as volume rises.
•Press (Volume)on the TV, or Volume - on the remote control to decrease volume.
The volume indicator will decrease in length as volume falls.
Mute setting
•Press Mute on the remote control to turn off the audio temporarily.
•Press Mute again, or press Vol u me + or Vo lu me - to restore the sound level.
TV sound mode selection
Press TV sound/red button on the remote control to select Sound 1, Sound 2, Sound 3, Auto,
NICAM, Stereo, or Mono systems (the items available will depend on the TV and video sound
system being received).
Changing programs
Selecting a program directly
To select a single-digit program, press the corresponding program selection button on the
remote control. For example, to select program 8, press the program selection button on
the remote control.
To select a double-digit program, press the program entry button on the remote control,
and then enter the program number using the program selection buttons. For example, to
ATV
AV 1
AV 2
PC
HDMI
AV 3 (or AV3-S)
Component 2
AV 4 (or AV4-S)
Component 1
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ vl3735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ vl3735 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info