567788
45
Zoom out
Zoom in
Previous page
1/73
Next page
Using BIOS setup 41
System Time: allows you to set the time of the system. Use
<+> or <-> to change the value.
System Date: allows you to set the date of the system. Use
<+> or <-> to change the value.
Advanced menu
The Advanced menu contains advanced settings of the system.
AHCI Mode: allows to enable AHCI (for better performance
during system boot).
Security menu
The Security menu contains the security settings, which
safeguard your system against unauthorized use.
Set Supervisor Password: This set of password controls the
system supervisor's access to the whole BIOS setup utility.
When typing the password, first make sure Num Lock is off,
and then type your password in the entry field and press
<Enter>. Confirm your password by typing it again and
pressing <Enter>.
Boot menu
The Boot menu contains the boot configuration settings of the
boot device. A list of boot devices will be displayed.
• Use <> or <> to select a device, and then press <+> to
move it up or <-> to move it down.
• To select a boot device manually, press the <F12> key when the
BenQ logo appears on the screen during system startup. The
Boot Menu will appear. Use <> or <> to select a device, and
then press <Enter> to confirm.
Exit menu
The Exit menu displays ways of exiting BIOS setup. After
finished with your settings, you must save and exit so that the
new settings can take effect.
Exit Saving Changes: saves the changes you have made and
exits BIOS setup. After finishing with your settings, you must
save and exit so that the new settings can take effect.
Exit Discarding Changes: exits BIOS setup without saving
the changes you have made.
Load Optimal Defaults: loads the default values for all the
items in the BIOS setup utility.
If you are not familiar with the items in the Advanced menu,
you are advised to keep the default. Setting values incorrectly
may cause system malformation.
Do NOT set the BIOS security password without having
memorized it or written it down and stored it with your Joybook
Lite warranty documentation. Should you happen to forget or
mislay the password once set, you will be greatly
inconvenienced in gaining subsequent access to your
Joybook Lite.
It is recommended that you go into BIOS to load manufacture
defaults, whenever you have installed new hardware
components.
JBL_U105 UM EN.book Page 41 Thursday, December 9, 2010 4:16 PM
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ U105i Joybook Lite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ U105i Joybook Lite in the language / languages: English as an attachment in your email.

The manual is 4,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info