636357
31
Zoom out
Zoom in
Previous page
1/55
Next page
Network connection 31
Network connection
Connecting to a LAN
To set the display to connect to a local area network:
1. Connect a RJ45 cable to the corresponding ports on the display and your LAN
switch or router.
2. Enter the OSD menu Configuration1 > Network settings. You will see the OSD
page similar to the following picture.
3. Use the /// buttons to set the Network device name.
4. If you are in a DHCP environment, highlight DHCP and select Enable. Once
selected, the IP address, Subnet mask, and Default gateway settings will be
displayed.
If you are not in a DHCP environment, highlight DHCP and select Disable.
Contact your ITS administrator for information on the IP address, Subnet mask,
and Default gateway settings and enter it accordingly.
5. Make sure the information on the Login user name is displayed.
6. Use the /// buttons to set Login password. The password is required
when using a computer browser to log in.
7. To control the display with a computer browser, highlight LAN control port and
select On.
8. To save the settings and return to the previous menu, highlight SET and press the
SET button on the remote control.
Controlling the display
Once you have the correct IP address for your display and the display is on or in standby
mode, you can use any computer that is on the same local area network to control the
display.
• You cannot control the display via the RS-232C connector when LAN control is in use.
• Currently most browsers are supported. However, if using Internet Explorer, only versions 7.0
or higher are supported.
• The screen shots in this manual are for reference only, and may differ from what is displayed on
your screen.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ TL650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ TL650 in the language / languages: English as an attachment in your email.

The manual is 47,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info