648928
41
Zoom out
Zoom in
Previous page
1/76
Next page
Operation 41
4. Press to select Hue and press /
to select its range. Increase in the range
will include colors consisted of more
proportions of its two adjacent colors.
Please refer to the illustration to the right
for how the colors relate to each other.
For example, if you select Red and set its
range at 0, only pure red in the projected
picture will be selected. Increasing its
range will include red close to yellow and
red close to magenta.
5. Press to select Gain and adjust its
values to your preference by pressing / . The contrast level of the primary
color you select will be affected. Every adjusent made will reflect to the image
immediately.
6. Press to select Saturation and adjust its values to your preference by pressing
/ . Every adjusent made will reflect to the image immediately.
For example, if you select Red and set its value at 0, only the saturation of pure
red will be affected.
•Saturation is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of “0” removes that color from the image entirely. If the
saturation is too high, that color will be overpowering and unrealistic.
7. Repeat steps 3 to 6 for other color adjusents.
8. Make sure you have made all of the desired adjusents.
9. Press MENU on the projector or remote control to exit and save the settings.
Reducing Noise Reduction
Reduces electrical image noise caused by different media players. The higher the
setting, the less the noise.
Select Noise Reduction
in the Advanced menu > Picture > Advanced... menu and
press / to adjust the value from 0 to 31.
Selecting a Film Mode
Select Film Mode in the Advanced menu > Picture > Advanced... menu and select
by pressing / on the projector or remote control.
On is the default and recommended selection for this projector. When Off is selected, the
Film Mode function is not available.
This function is only available when Video or S-Video with NTSC system is selected.
RED
BLUE
GREEN
Ye llow
Cyan
Magenta
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ TH670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ TH670 in the language / languages: English as an attachment in your email.

The manual is 7,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ TH670

BenQ TH670 User Manual - German - 65 pages

BenQ TH670 User Manual - Dutch - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info