648928
31
Zoom out
Zoom in
Previous page
1/76
Next page
Operation 31
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase
a lock, such as the Kensington lock, to secure the projector. You can locate a
Kensington lock slot on the rear side of the projector. See item 20 on page 10 for
details.
A Kensington security cable lock is usually a combination of key(s) and the lock. Refer
to the lock's documentation for finding out how to use it.
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an
option for setting up password security. The password can be set through the On-
Screen Display (OSD) menu.
WARNING: You will be inconvenienced if you activate the power-on lock
functionality and subsequently forget the password. Print out this manual (if
necessary) and write the password you used in this manual, and keep the manual in
a safe place for later recall.
Setting a password
Once a password has been set, the projector cannot be used unless the correct
password is entered every time the projector is started.
1. Open the OSD menu and make sure the Menu Type is Advanced. See "Using
the menus" on page 28 for details.
2. Go to the System Setup: Advanced > Password > Change Password
menu, and press OK on the projector or remote control.
3. Enter the new or current password. As
pictured to the right, the four arrow keys ( ,
, , ) respectively represent 4 digits (1,
2, 3, 4). According to the password you desire
to set, press the arrow keys to enter six digits
for the password.
4. Confirm the new password by re-entering the
new password. Once the password is set, the
OSD menu returns to the Password page.
IMPORTANT: The digits being input will display as
asterisks on-screen. Write your selected password down here in this manual in
advance or right after the password is entered so that it is available to you should
you ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
5. Press to select Power On Lock and select On by pressing / .
6. To leave the OSD menu, press MENU on the projector or remote control.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ TH670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ TH670 in the language / languages: English as an attachment in your email.

The manual is 7,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ TH670

BenQ TH670 User Manual - German - 65 pages

BenQ TH670 User Manual - Dutch - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info