648912
39
Zoom out
Zoom in
Previous page
1/74
Next page
39
Using the projector
English
Setting a wall color
In the situation where you are projecting onto a colored surface such as a painted wall which may not be
white, the Wall Color feature can help correct the projected picture’s color to prevent possible color
difference between the source and projected pictures. There are several precalibrated colors to choose
from: Light Yellow, Pink, Light Green, Blue, and Blackboard.
To select wall color:
1. Press MENU/EXIT and then press / until the Display menu is highlighted.
2. Press to highlight Wall Color.
3. Press / to select a wall color to suit the color of the surface which you are projecting on.
Hiding the image
In order to draw the audience's full attention to the presenter, you can
use BLANK to hide the screen image. When this function is activated
with an audio input connected, the audio can still be heard.
You can set the blank time in the
System Setup: Basic > Operation
Settings > Blank Timer menu to let the projector return the image
automatically after a period of time when there is no action taken on the
blank screen. The length of time can be set from 5 to 30 minutes in 5-
minute increments.
If the preset time spans are not suitable for your personation, select
Disable.
No matter
Blank Timer is activated or not, you can press any key on the projector or remote control
to restore the picture.
Once BLANK is pressed, the projector lamp enters Economic mode automatically.
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings from being
changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the
projector will operate except Power.
To lock or unlock the control panel keys:
1. Press MENU/EXIT to open the OSD menu and press / to highlight the System Setup: Basic
menu.
2. Press to highlight Panel Key Lock and press / to toggle the function On. A confirmation
message is displayed.
3. Press / to select Yes and press MODE/ENTER.
Freezing the image
Press FREEZE on the remote control to freeze the image. The word
"FREEZE" will be displayed in the upper left corner of the screen. To
release the function, press any key on the projector or remote control.
Even if an image is frozen on the screen, the pictures are running on the
video or other device. If the connected devices have active audio output,
you will still hear the audio even though the image is frozen onscreen.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ SX930 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ SX930 in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ SX930

BenQ SX930 User Manual - German - 72 pages

BenQ SX930 User Manual - Dutch - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info