648912
35
Zoom out
Zoom in
Previous page
1/74
Next page
35
Using the projector
English
Setting a preferred color temperature
To set a preferred color temperature:
1. Highlight Color Temperature and select Cool, Normal, Warm or Lamp Native by pressing
/ on the projector or remote control.
2. Press to highlight Color Temperature Fine Tuning and press MODE/ENTER. The Color
Temperature Fine Tuning page is displayed.
3. Press / to highlight the item you want to change and adjust the values by pressing / .
Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue.
Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue.
4. To save and leave the settings, press MENU/EXIT.
Color Management
In most installation situations, color management will not be necessary, such as in classroom, meeting
room, or lounge room situations where lights remain on, or where building external windows allow
daylight into the room.
Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or
home theaters, should color management be considered. Color management provides fine color control
adjustment to allow for more accurate color reproduction, should you require it.
Proper color management can only be achieved under controlled and reproducible viewing conditions.
You will need to use a colorimeter (color light meter), and provide a set of suitable source images to
measure color reproduction. These tools are not provided with the projector, however, your projector
supplier should be able to provide you with suitable guidance, or even an experienced professional
installer.
The 3D Color Management provides six sets (RGBCMY) of colors to be adjusted to favorite colors.
When you select each color, you can independently adjust its color range and saturation according to
your preference.
To adjust and store the settings:
1. In the Picture menu, highlight Advanced... and press MODE/
ENTER. Then, highlight 3D Color Management and press
MODE/ENTER. The 3D Color Management page is displayed.
2. Highlight Primary Color and press / to select a color from
among Red, Green, Blue, Cyan, Magenta, and Yellow.
3. Press to highlight Hue and press / to select the color range
you wish to make adjustment. The bigger the range, the more
proportions of its two adjacent colors the color contains.
Please refer to the illustration to the right for how the colors relate
to each other. For example, if you select Red and set its range at 0,
only pure red is selected. Increasing its range will include both the red color close to yellow and red
color close to magenta.
Press to highlight Saturation and adjust the color saturation level by pressing / .
If you select Red and set its range at 0, only the saturation of the pure red will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less saturated
colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that
color will be overpowering and unrealistic.
4. To leave and save the settings, press MENU/EXIT.
Red
Yellow
Green
Cyan
Magenta
Blue
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ SX930 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ SX930 in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ SX930

BenQ SX930 User Manual - German - 72 pages

BenQ SX930 User Manual - Dutch - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info