648912
32
Zoom out
Zoom in
Previous page
1/74
Next page
32
Using the projector
English
Setting the User 1/User 2 mode
There are two user-definable modes if the current available picture modes are not suitable for your need.
You can use one of the picture modes (except the selected User mode) as a starting point and customize
the settings.
1. In the Picture menu, highlight Picture Mode and press / to select User 1 or User 2 mode.
2. Press to highlight Reference Mode.
This function is only available when User 1 or User 2 mode is selected up in the Picture Mode sub-menu
item.
3. Press / to highlight a picture mode that is closest to your need.
4. Press to select a sub-menu item to be changed and adjust the value with / . See "Fine-tuning
the picture quality" on page 33 and "Advanced picture quality controls" on page 34 for details.
5. When all settings have been done, press MENU/EXIT to save and leave the settings.
Renaming user modes
You can change User 1 and User 2 to the names easy to be identified or understood by the users of this
projector. The new name can be up to 8 characters including English letters (A-Z, a-z), digits (0-9), and
space (_).
To rename user modes:
1. Make sure you have selected User 1 or User 2 as your picture mode.
If you are not under User 1 or User 2 mode, the projector will automatically select User 1 as the user mode
to rename.
2. In the Picture menu, highlight Rename User Mode and press MODE/ENTER to display the
virtual keypad.
3. Use // / and ENTER keys to select the letters on the virtual keypad to type in desired name.
4. When done, press MENU/EXIT to leave the virtual keypad.
Resetting the picture mode
All of the adjustments you’ve done in the Picture menu can be returned to the factory preset values
with a key press on the highlight of Reset.
To reset the picture mode to the preset factory values:
1. In the Picture menu, highlight Picture Mode and press / to select the picture mode (including
User 1 or User 2) you want to reset.
2. Press to highlight Reset Picture Settings and press MODE/ENTER.
3. Press / to select Current or All Picture modes and press MODE/ENTER. The confirmation
message is displayed.
4. Press / to highlight Reset and press MODE/ENTER. The picture mode will return to the
factory preset settings.
5. Repeat steps 1-4 if you want to reset other picture modes.
Do not confuse the Reset Picture Settings function here with the Reset All Settings in the System Setup:
Advanced menu. The Reset All Settings function returns most of the settings to the factory preset values
system wide. See "Reset All Settings" on page 58 for details.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ SX930 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ SX930 in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ SX930

BenQ SX930 User Manual - German - 72 pages

BenQ SX930 User Manual - Dutch - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info