648919
27
Zoom out
Zoom in
Previous page
1/71
Next page
27
Using the projector
English
Correcting picture distortion
The 2D keystone and corner fit functions are closely related as both make adjustment to correct picture
distortion. Therefore, when correcting picture distortion, both corner fit and 2D keystone functions
should be used in conjunction to achieve the best picture shape.
To achieve the best picture shape:
When installing the projector, align the projector to the screen so they are as perpendicular to each
other as possible in order to minimize picture distortion.
When making corner fit adjustments, if the desired effect cannot be achieved, adjust the 2D keystone
value and try again.
When making 2D keystone adjustments, if the desired effect cannot be achieved, adjust the corner fit
value and try again.
Using 2D Keystone function
Keystoning occurs when the projector is not perpendicular to the screen and is where the projected
picture displays visible as a trapezoid shape like either of the following:
Two parallel sides (left and right, or top and bottom) but is noticeably wider on either side.
No parallel sides.
To correct the picture’s shape, you can perform the following steps.
1. Adjust the projection angle. Move the projector to be in front of the center of the screen with the
center of the lens level with the screen.
2. If the picture is still distorted, or the projector is unable to be positioned as described above, you will
need to manually correct the picture.
Using the remote control or projector
i. Press one of the Arrow/Keystone keys (Left / , Up / ,
Right / , Down / ) to display the 2D Keystone page.
ii. See step iii below for further operation.
Using the OSD menu
i. Press MENU/EXIT and then press / until the Display
menu is highlighted.
ii. Press to highlight 2D Keystone and press ENTER. The
2D Keystone page is displayed.
iii. Press the key whose keystone icon is opposite to the shape of the projected picture. Continue
pressing the same key or press the other keys until you are satisfied with the shape.
The values on the lower portion of the page change while pressing. When the values reach their
maximum or minimum with repeated key presses, the picture’s shape will stop changing. You will
not be able to change the picture further in that direction.
Two parallel sides
No parallel sides
Press
/
Press
/
Press
/
Press
/
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ SU964 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ SU964 in the language / languages: English as an attachment in your email.

The manual is 5,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ SU964

BenQ SU964 User Manual - German - 74 pages

BenQ SU964 User Manual - Dutch - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info