214906
21
Zoom out
Zoom in
Previous page
1/54
Next page
21
Connection
English
Connecting an S-Video or a composite Video source device
Examine your Video source device to determine if it has an unused S-Video or Video output socket available:
If it has both sockets, use the S-Video output socket for connection as the S-Video terminal provides better
picture quality than the Video terminal. See "Connecting Video source devices" on page 18 for details.
If it has either of the output socket, you can also continue with this procedure.
If not, you will need to reassess which method you can use to connect to the device.
If you have already made a Component Video connection between the projector and the video source
device, you need not connect to this device again using an S-Video or composite Video connection as this
makes an unnecessary second connection of poorer picture quality. You need only connect using a
composite Video connection if both Component Video and S-Video are not supplied on the video source
device (for example, with some analog video cameras).
To connect the projector to an S-Video/Video source device:
1. Take an S-Video/Video cable and connect one end to the S-Video/Video output socket of the Video source
device.
2. Connect the other end of the S-Video/Video cable to the S-VIDEO/VIDEO socket on the projector.
3. If you wish to make use of the projector (mixed mono) speakers in your presentations, take a suitable audio
cable and connect one end of the cable to the audio output socket of the device, and the other end to the
AUDIO socket of the projector.
Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Audio
Settings" on page 42 for details.
The final connection path should be like that shown in the following diagram:
AV device
1. Video cable
1. S-Video cable
3. Audio cable
The projector is only
capable of playing mixed
mono audio, even if a
stereo audio input is
connected. See
"Connecting audio" on
page 18 for details.
If the selected video image
is not displayed after the
projector is turned on and
the correct video source
has been selected, check
that the Video source
device is turned on and
operating correctly. Also
check that the signal cables
have been connected
correctly.
1
1
3
or
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ sp870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ sp870 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ sp870

BenQ sp870 User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info