214255
21
Zoom out
Zoom in
Previous page
1/35
Next page
21 Using the projector and remote control
Adjusting the image
Adjusting the angle height
The projector is equipped with 1 front quick-release adjuster foot
and 2 rear adjuster feet. These adjusters change the image height
and projection angle. To adjust the projector:
1. Lift the projector up and press the adjuster button to release
the adjuster. The front adjuster foot will drop into position
and lock into place when you release the button. It can lift the
projector by up to 15 degrees. Manually screw it up or down
for fine height adjustment.
2. Screw the rear adjuster feet to adjust the horizontal angle so
that the projector is stable and the projection is level.
Auto-adjusting the image
With one press of the Auto button on the projector or remote control,
the built-in intelligent Auto-adjustment function will re-adjust the
values of Frequency and Clock to provide the best image quality.
The current source information will be displayed at the bottom right
of the screen for 3 seconds.
The screen will be blank while Auto adjustment is functioning.
Correcting Keystone picture distortion
Keystone picture distortion (keystoning) occurs in situations where
the projector is not perpendicular and level with the centre of the
screen. It results in the projected image being wider at either the top or
bottom of the image, (seen in the shape of a building stone archway
keystone ).
If you cannot alter the location of the projector, you can manually
correct for it by following any one of these steps:
•Press 3 Left or Right 4 (hot key) on the projector to display the
status bar labelled Keystone. Press 3 Left to correct keystoning at
the top of the image. Press Right 4 to correct keystoning at the
bottom of the image.
•Press or on the remote control to display the
status bar labelled Keystone, then press to correct
keystoning at the top of the image or press to
correct keystoning at the bottom of the image.
C
T
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ pe 5120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ pe 5120 in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ pe 5120

BenQ pe 5120 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info