214255
13
Zoom out
Zoom in
Previous page
1/35
Next page
13 Overview
Replacing the batteries in the remote control
Caution with batteries
Avoid leaving the remote control and batteries in an excessive heat or humid environment like the
kitchen, bathroom, sauna, sunroom, or in a closed car.
Take care to align the polarities when installing the batteries. Be aware that there is the possibility of an
explosion if the batteries are incorrectly fitted.
Replace batteries only with the same or equivalent type as recommended by the battery manufacturer.
Dispose of used batteries according to the battery manufacturer’s instructions and local environment
regulations for your region.
If the remote control will not be used for an extended period of time, remove the batteries to avoid
damage to the control from possible battery leakage.
1. Power (Refer to pages 19 and 23 for more information.)
Hold this button down for one second to turn the projector on.
Press this button twice to turn the projector off.
2. Source buttons (Refer to page 23 for more information.)
Selects an input signal to display on the projector.
3. Aspect buttons
Selects an image aspect ratio to suit the input signal.
4. Auto (Refer to page 20 for more information.)
Automatically determines the best picture timings for the
displayed image.
5. Preset (Refer to page 22 for more information.)
Selects one of the preset modes to suit your program type.
6. Menu and directional buttons (c/e/d/f) (Refer to page 25 for
more information.)
Press Menu to turn the on-screen menu on.
Press directional buttons to select the desired menu items and
make adjustments.
Exit and saves menu settings by pressing Menu again.
7. Picture quality adjustment buttons (Refer to 26 for more informa-
tion.)
8. Keystone buttons (Refer to 21 for more information.)
Press to reduce the upper portion of the image. Press to
reduce the lower portion of the image.
9. Default
Returns all settings to the factory preset values.
10. Light
Turns the remote control’s backlight on or off.
1. Push and open the battery
compartment lid in the direction
shown.
2. Install batteries as
indicated by the diagram
inside the compartment.
3. Insert the lid hinge into
the compartment end and
close the lid.
C
T
3
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ pe 5120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ pe 5120 in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ pe 5120

BenQ pe 5120 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info