187651
38
Zoom out
Zoom in
Previous page
1/57
Next page
Recovering your system using QDataTrove in Windows XP34
Creating a User Recovery CD/DVD
You can use QDataTrove to create recovery discs that include
your own backup system image file.
1. Click the button to select
Create User Recovery CD/
DVD
.
2. Select a disc type from the
Disc Category drop-down
menu, and then select the source of your system image file in
Source Image. Click OK to proceed.
3. Insert a blank disc when prompted to do so, and then click
Yes.
4. Select your preferred burning speed, and then click
OK.
5. The disc burning process starts. A
Create User Recovery
CD/DVD
window appears on the screen and displays the
current status.
6. After disc burning finishes (the progress bar shows 100%
completion), click at the top right corner of the window
to proceed.
7. Click
Exit and then Yes to leave the application.
Store the discs in a safe place for future use.
Creating Bootable USB flash Disk
You can use QDataTrove to create a bootable USB flash disk to
recover your system to the factory settings.
1. Connect a USB flash disk to your nScreen.
2. Click the button to select
Create Bootable USB
Disk
.
3. Select a connected USB flash disk from the USB device drop-
down menu. Select the USB flash disk carefully if you have
more than one USB flash disk connected to your nScreen at
the same time. All the data stored on the one used for
bootable USB flash disk will be erased.
4. If there is sufficient space on the select USB flash disk, you
can click
OK to proceed.
5. After the bootable USB flash disk is complete (the progress
bar shows 100% completion), click at the top right
corner of the window to proceed.
6. Click
Exit and then Yes to leave the application.
Store the USB flash disk in a safe place for future use.
Please note that the burning process cannot be interrupted
once started.
With QDataTrove you can create bootable USB flash disks
only. Do not connect hard disk drives or memory card readers
that have USB interface to proceed.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ nscreen i221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ nscreen i221 in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info