648953
26
Zoom out
Zoom in
Previous page
1/62
Next page
Bediening26
5. Bevestig het nieuwe wachtwoord door het nieuwe wachtwoord opnieuw in te
voeren.
6. U hebt een nieuw wachtwoord aan de projector toegewezen. Voer het nieuwe
wachtwoord in als u de projector weer start.
7. Sluit het OSD-menu af door op MENU/EXIT te drukken.
De wachtwoordfunctie uitschakelen
U kunt de wachtwoordbeveiliging ook uitschakelen. Ga terug naar het menu
SYSTEEMINSTLL: Geavanceerd > Beveiligingsins Tellingen >
Beveiligingsinstellingen wijzigen zodra het OSD-menu is geopend. Druk op
MODE/ENTER. Het bericht "WACHTWOORD INVOEREN" verschijnt. Voer het
huidige wachtwoord in.
i. Als het juiste wachtwoord is ingevoerd, keert het OSD-menu terug naar de
pagina Beveiligingsins Tellingen.
Druk op om Inschakelblokkering te markeren en druk op / om Uit
te selecteren. U hoeft de volgende keer dat u de projector inschakelt geen
wachtwoord meer in te voeren.
ii. Als het wachtwoord niet juist is, verschijnt het foutbericht voor het wachtwoord
drie seconden op het scherm. Daarna verschijnt het bericht
"WACHTWOORD INVOEREN" en kunt u het opnieuw proberen. U kunt
op MENU/EXIT drukken om de wijziging te annuleren of een ander
wachtwoord proberen.
Hoewel de wachtwoordfunctie is uitgeschakeld, dient u het oude wachtwoord bij de hand te houden voor het
geval dat u de wachtwoordfunctie ooit weer moet inschakelen door het oude wachtwoord in te voeren.
Schakelen tussen ingangssignalen
De projector kan tegelijkertijd op verschillende apparaten worden aangesloten. De
beelden van deze apparaten kunnen echter niet tegelijkertijd op volledig scherm worden
weergegeven. Tijdens het opstarten zoekt de projector automatisch beschikbare signalen.
Zorg dat de functie Snel automatisch zoeken in het menu INGANG is ingesteld op
Aan als u wilt dat de projector automatisch signalen zoekt.
De ingang selecteren:
1. Druk op SOURCE op de projector of
afstandsbediening. Een ingangselectiebalk
verschijnt dan.
2. Druk op / totdat het gewenste signaal is
geselecteerd en druk op MODE/ENTER.
Zodra het signaal is gevonden, wordt de
informatie over de geselecteerde ingang een
aantal seconden in de hoek van het scherm
weergegeven. Als er meerdere apparaten op de
projector zijn aangesloten, herhaal dan stappen
1-2 om een ander signaal te zoeken.
De helderheid van het geprojecteerde beeld verandert tijdens
het schakelen tussen de verschillende ingangssignalen.
Grafische "pc"-presentaties met stilstaande beelden zijn
doorgaans helderder dan "Video"-presentaties met
bewegende beelden (films).
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ MS630ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ MS630ST in the language / languages: Dutch as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ MS630ST

BenQ MS630ST User Manual - English - 62 pages

BenQ MS630ST User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info