216109
56
Zoom out
Zoom in
Previous page
1/75
Next page
Operation56
English
Quick
Cooling
(On)
Selecting On enables the function and the projector cooling time will
be shortened to a few seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
High Altitude
Mode
(Off)
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 43 for details.
Audio Setting
Mute (Off)
Volume (
5)
Power On/Off ring tone (
On)
See "Adjusting the sound" on page 44 for details.
Lamp
Settings
Lamp Mode (Normal)
See "Setting Lamp mode as Economic" on page 59 for details.
Reset lamp timer
See "Resetting the lamp timer" on page 63 for details.
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 59 for details on
how the total lamp hour is calculated.
Security
Settings
Change password
You will be asked to enter the current password before changing to a
new one. See "Utilizing the password function" on page 27 for details.
Power on Lock (Off)
Baud Rate
(115200)
Selects a baud rate that is identical with your computers so that you
can connect the projector using a suitable RS-232 cable and update or
download the projectors firmware. This function is intended for
qualified service personnel.
Test Pattern
(Off)
Selecting On enables the function and the projector displays the grid
test pattern. It helps you adjust the image size and focus and check
that the projected image is free from distortion.
Closed
Caption
(CC1)
Selecting On enables the function. The closed captioning text is
displayed if available.
Close Caption will disable when aspect change to 16:9 or rear.
Standby
Monitor Out
(Off)
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 and
MONITOR OUT sockets are correctly connected to devices. See
"Connecting a monitor" on page 19 for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
Lan Control
Settings
Sets the networking and remote management of the projector. See
"Controlling the projector through a Lan environment" on page 45 for
details.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Language, Projector Position, High Altitude
Mode, Security Settings, Baud Rate, Lan Control Settings.
5. SYSTEM SETUP:
Advanced menu
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ mp626 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ mp626 in the language / languages: English as an attachment in your email.

The manual is 6,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ mp626

BenQ mp626 User Manual - Dutch - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info