214621
48
Zoom out
Zoom in
Previous page
1/62
Next page
Operation44
High Altitude
Mode (off)
A mode for operation in areas like high altitude or high temperature. We
recommend you use the High Altitude Mode when your environment is
higher than 3000 feet above sea level, or is hotter than 40
°C, or whenever
the projector will be used for extended periods of time (>10 hours)
without shutdown.
To activate the High Altitude Mode, select On by pressing Left 3/Right
4on the projector or remote control. A confirmation message displays.
Press6.
Next time you turn on the projector, it will show a message pictured below
as a reminder during the start-up.
Operation under "High Altitude Mode" may cause a higher decibel
operating noise level because of increased fan speed necessary to improve
overall system cooling and performance.
If you use this projector under other extreme conditions excluding the
above, it may display auto shut-down symptoms, which is designed to
protect your projector from over-heating. In cases like this, you should
switch to High Altitude mode to solve these symptoms. However, this is
not to state that this projector can operate under any and all harsh or
extreme conditions.
Auto Off
This function allows the projector to turn off automatically if no input
signal is detected after a set period of time. Press Left 3/Right 4on the
projector or remote control to set the duration before the projector is
turned off.
Economic
Mode (off)
Use this mode to reduce system noise and reduce power consumption by
20%. If this mode is activated, the light output will be reduced and result
in darker projected images.
Setting the projector in Economic mode extends the lamp timer
automatic shutdown feature. For more information on how the total
lamp hour is calculated, see "Calculation of lamp hour" on page 47.
Presentation
Timer
Helps to remind the presenter to finish the presentation within a certain
timeframe. Refer to "Setting the presentation timer" on page 35 for more
information.
FAQ
Displays possible solutions to problems you may encounter.
We recommend you use the High Altitude Mode by selecting
On
whenever your environment is higher than 1500m.
Confirm to turn High Altitude Mode on?
Yes
6 No 5
Current Status
High Altitude Mode On
This mode is used for protecting projector from extreme environment and may cause high
fan speed.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ mp 721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ mp 721 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ mp 721

BenQ mp 721 User Manual - Dutch - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info