214621
29
Zoom out
Zoom in
Previous page
1/62
Next page
Operation 25
Operation
Start up
1. Plug the power cord into the projector and
into a wall socket. Turn on the wall socket
switch (where fitted). Check that the Power
indicator on the projector lights orange after
power has been applied..
2. Remove the lens cap. If it is left on, it could
become deformed due to the heat produced by the
projector lamp.
3. Press and hold (for 2 seconds)
Power on the projector or remote
control to start the projector. As soon as
the lamp lights up, a "Power On Tone"
will be heard. The Power indicator light
flashes green and stays green when the
projector is on.
The start up procedure takes about 30
seconds. In the later stage of start up, a
startup logo is projected.
(If necessary) Rotate the focus ring to
adjust the image clearness.
If you don't want to activate Power on/off tone, you can enter the OSD menu to disable this
function. See "Mute (off)" on page 42 for details.
If the projector is still hot from previous activity, it will run the cooling fan for
approximately 90 seconds before energizing the lamp.
4. If you are prompted for a password, press the arrow buttons to enter a four digit
password. See "Utilizing the password function" on page 26 for details.
5. Switch on all of the connected equipment.
The projector will start to search for input signals. The current input source being
scanned displays in the center of the screen. The searching message will continue
displaying until an input source signal is found.
Yo u c a n p res s SOURCE on the projector or remote control to select your desired input
signal. See "Switching input signal" on page 28 for details.
A message of "Resolution Reminding" will display when the projector detects that the
resolution of the input source is not XGA.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ mp 721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ mp 721 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ mp 721

BenQ mp 721 User Manual - Dutch - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info