Manual BenQ mp 721 (page 18 of 62) (English)

214621

Zoom out

Zoom in

1/62

Positioning your projector14

Obtaining a preferred projected image size

The distance from the projector lens to the screen, the zoom setting, and the video format

each factors in the projected image size.

The native resolution of the projector is 1024 x 768 pixels, which is a 4 to 3 aspect ratio

(expressed as 4:3). To be able to project a complete 16:9 (widescreen) aspect ratio image, the

projector can resize and scale a widescreen image to the projector's native aspect width. This

will result in a proportionally smaller height equivalent to 75% of the projector's native

aspect height.

Thus, a 16:9 aspect image will not utilize 25% of the height of a 4:3 aspect image displayed

by this projector. This will be seen as darkened (unlit) bars along the top and bottom

(vertical 12.5% height respectively) of the 4:3 projection display area whenever displaying a

scaled 16:9 aspect image in the vertical center of the 4:3 projection display area.

When determining the position of your projector, you should consider its intended use and

input signal aspect ratios. All inputs (other than composite Video being fed a 16:9 aspect

signal) will display in a 4:3 aspect ratio (and will require an additional 33% display height

than that of the scaled 16:9 aspect image projection area).

IMPORTANT: Do not select a permanent projector position based upon a 16:9 projection if you

will ever need to select an input (other than composite Video being fed a 16:9 aspect signal).

The projector should always be placed horizontally level (like flat on a table), and positioned

directly perpendicular (90° right-angle square) to the horizontal center of the screen. This

prevents image distortion caused by angled projections (or projecting onto angled surfaces).

The modern digital projector does not project directly forward (like older style reel-to-reel

film projectors did). Instead, digital projectors are designed to project at a slightly upward

angle above the horizontal plane of the projector. This is so that they can be readily placed

on a table and will project forward and upwards onto a screen positioned so that the bottom

edge of the screen is above the level of the table (and everyone in the room can see the

screen).

If the projector is mounted on a ceiling, it must be mounted upside-down so that it projects

at a slightly downward angle.

You can see from the diagram on page 16, that this type of projection causes the bottom edge

of the projected image to be vertically offset from the horizontal plane of the projector.

When ceiling mounted, this refers to the top edge of the projected image.

If the projector is positioned further away from the screen, the projected image size

increases, and the vertical offset also increases proportionately.

When determining the position of the screen and projector, you will need to account for

both the projected image size and the vertical offset dimension, which are directly

proportional to the projection distance.

BenQ has provided a table of 4:3-aspect-ratio screen sizes to assist you in determining the

ideal location for your projector. There are two dimensions to consider, the perpendicular

horizontal distance from the center of the screen (projection distance), and the vertical

offset height of the projector from the horizontal edge of the screen (offset).

4:3 aspect image in a 4:3 aspect display area

16:9 aspect image scaled to a 4:3 aspect

display area

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BenQ mp 721 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ mp 721

BenQ mp 721 User Manual - Dutch - 63 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BenQ mp 721 Manual

Product: