144937
22
Zoom out
Zoom in
Previous page
1/51
Next page
English
Using the remote control 19
Using the remote control
Power on, off and standby
Turning on the TV
After plugging the TV's power cable into a wall outlet, the TV will enter standby mode
automatically. The power indicator will light up orange. Press Power on the remote
control. The TV will turn on and the power indicator will change to blue.
Putting the display to standby
Press Power on the remote control again, and the TV will return to standby mode. The
power indicator will turn orange.

The display still consumes a very small amount of power (about 1W) in standby mode.
Switching inputs
to the display.
• BeawarethatHDMIinputmustbeHDCP-complianttobedisplayed.
When switching to the HDMI inputs, the display needs several seconds to detect the HDCP
information from the signal source and no image will be displayed during this period. This is
not a malfunction.
Adjusting sound setting
Adjusting volume
• PressVOL on the remote control to increase volume. The volume indicator
increases in length as volume rises.
• PressVOL on the remote control to decrease volume. The volume indicator
decreases in length as volume falls.
Mute setting
Press MUTE on the remote control to turn off the sound temporarily.
Press
MUTE once more, or press VOL or VOL to restore the sound level.
Selecting a TV sound mode
Press TV AUDIO on the remote control to toggle TV sound among available modes. (The
modes available will depend on the TV or Video sound system being received).
1. Turn on all connected equipment or
devices before selecting an input.
2. Press
INPUT on the TV to view
the current selected input. Press
INPUT button, use
▲▼
button to
select your desired input then press
OK button to confirm. You can
also press
INPUT continuously
to switch between different input
sources.
• Theseoptionswillonlyappearwhen
corresponding signals are connected
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ mk2442 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ mk2442 in the language / languages: English as an attachment in your email.

The manual is 10,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info