648923
54
Zoom out
Zoom in
Previous page
1/75
Next page
Operation54
4. System Setup: Basic menu
Presentation
Timer
Reminds the presenter to finish the presentation within a certain
time frame. See
"Setting the presentation timer" on page 41
for details.
Language
Sets the language for the On-Screen Display (OSD) menus.
See "Using the menus" on page 30 for details.
Projector
Installation
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See "Choosing a location" on page 20 for
details.
Menu Setting
Menu display time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Selecting On allows the projector to remind you to clean the filter.
Operation
Setting
Direct Power On
Powers projector on automatically when the power cable is
connected.
Signal Power On
Sets whether to turn the projector directly on without pressing
POWER or ON when the projector is in standby mode and the
signal is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off" on
page 60 for details.
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On
enables the function and the projector cooling time will be shortened
from a normal 90 second duration to approximately 2 seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
Instant Restart
Selecting On enables you to restart the projector immediately within
90 seconds after turning it off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image"
on page 42 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
FUNCTION DESCRIPTION
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ MH684 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ MH684 in the language / languages: English as an attachment in your email.

The manual is 21,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ MH684

BenQ MH684 User Manual - German - 75 pages

BenQ MH684 User Manual - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info