676064
63
Zoom out
Zoom in
Previous page
1/73
Next page
Maintenance 63
3. Remove the lamp cover by (a) sliding
the cover toward the side of the
projector and (b) lifting it off.
Do not turn the power on with
the lamp cover removed.
Do not insert your fingers
between the lamp and the
projector. The sharp edges inside
the projector may cause injuries.
4. Loosen the screws that secure the
lamp.
5. Lift the handle so that it stands up.
Use the handle to slowly pull the
lamp out of the projector.
Pulling it too quickly may cause
the lamp to break and scatter
broken glass in the projector.
Do not place the lamp in locations
where water might splash on it,
children can reach it, or near
flammable materials.
Do not insert your hands into the
projector after the lamp is
removed. If you touch the optical
components inside, it could cause
color unevenness and distortion
of the projected images.
6. Insert the new lamp into the lamp
compartment and make sure it fits in
the projector.
7. Tighten the screws that secure the
lamp.
Loose screw may cause a bad
connection, which could result in
malfunction.
Do not over tighten the screws.
8. Ensure the handle is fully laid flat and
locked in place.
(a)
(b)
4
5
7
6
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ MH535A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ MH535A in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info