676001
6
Zoom out
Zoom in
Previous page
1/76
Next page
English
6
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information technology
equipment. However, to ensure safe use of this product, it is important that you follow the instructions
mentioned in this manual and marked on the product.
Safety Instructions
1. Do not look straight at the projector lens during operation. The intense light beam may damage your
eyes.
2. Always open the lens shutter or remove the lens cap when the projector lamp is on.
3. In some countries, the line voltage is NOT stable. This projector is designed to operate safely within a
mains voltage between 100 to 240 volts AC, but could fail if power cuts or surges of ±10 volts occur.
In areas where the mains voltage may uctuate or cut out, it is recommended that you connect your
projector through a power stabilizer, surge protector or uninterruptible power supply (UPS).
4. Do not block the projection lens with any objects when the projector is under operation as this
could cause the objects to become heated and deformed or even cause a re. Press ECO BLANK
on the remote control to turn off the lamp temporarily.
5. Do not place this product on an unstable cart, stand, or table. The product may fall, sustaining serious
damage.
6. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may
cause death if you should come into contact with live parts.
Under no circumstances should you ever undo or remove any other covers. Refer servicing only to
suitably qualied professional service personnel.
7. Do not place this projector in any of the following environments.
y Space that is poorly ventilated or conned. Allow at least 50 cm clearance from walls and free
ow of air around the projector.
y Locations where temperatures may become excessively high, such as the inside of a car with all
windows rolled up.
y Locations where excessive humidity, dust, or cigarette smoke may contaminate optical
components, shortening the projector's life span and darkening the image.
y Locations near re alarms
y Locations with an ambient temperature above 40°C / 104°F
y Locations where the altitudes are higher than 5000 m (16400 feet).
8. Do not block the ventilation holes.
y Do not place this projector on a blanket, bedding or any other soft surface.
y Do not cover this projector with a cloth or any other item.
y Do not place inammables near the projector.
If the ventilation holes are seriously obstructed, overheating inside the projector may result in a re.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ LX770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ LX770 in the language / languages: English as an attachment in your email.

The manual is 14,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info