648914
56
Zoom out
Zoom in
Previous page
1/85
Next page
English
56
Network Mode
Projector Control
IP Address
Subnet Mask
Gateway
DHCP
Apply
Off
Reset Network
Computer 1 MENU Exit
Picture
System \ Network
Display Setup Advanced System Information
Press
▲▼
arrow keys and Enter key to select network and its settings:
IP Address: To specify an IP address, press the Enter button to show the IP address input
window. Use the
◄►
buttons to select the number in the address to be changed. Use the
▲▼
buttons to increase or decrease the number in the IP address.
Subnet Mask: Set up IP address of subnet.
Gateway: Set up IP address of gateway.
DHCP: Set DHCP to On or Off. If this is set to On, the DHCP server of the network domain
assigns an IP address to the projector. That is, the IP address is displayed in the address window
instead of being entered manually. Otherwise, the domain does not or cannot assign an IP
address, and 0. 0. 0. 0 is shown on the IP address window.
Apply: Select this button and press Enter. It takes several seconds to execute the change in
network settings till the following message disappears.
Apply Network
Yes No
For further information on network control connections and settings, please refer to the
Remote control manual.
Background
This function can be used to select pictures or color displayed on the blank screen. The
background colors that you can select include logo, blue, black and white.
Startup Logo
Press
◄►
arrow keys to enable /disable the startup logo function.
Trigger
The projector features one trigger output. If the projector comes with an auto screen device,
you can connect it to the trigger to open the screen when the projector powers up. This
function may have a 2-3 second lag before powering up.
Dynamic Black
This function allows the projector to automatically adjust the contrast of the image during the
projection.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ LU9715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ LU9715 in the language / languages: English as an attachment in your email.

The manual is 17,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ LU9715

BenQ LU9715 User Manual - German - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info