648914
49
Zoom out
Zoom in
Previous page
1/85
Next page
English
49
HDMI 1.4a 3D input signal
HDMI 1.4a 3D signal sent to the projector through digital transmitter.
Side by Side (Half): Set 3D format to Side by Side manually. This option applies to HDMI input
signal or HDMI signal through a digital transmitter.
Top and Bottom: Set 3D format to Top and Bottom. This option applies to HDMI, DVI, or
DisplayPort input signals or these signals through digital transmitter.
Frame Sequential: Set input format to Frame Sequential.
DLP Link: Select to disable or enable DLP Link sync.
3D Swap: Set 3D Swap to reverse if left and right eye 3D image inversion by 3D glasses is
needed. If image looks normal, keeps current settings, Normal, intact.
Caution:
The projector supports DLP Link and 3D IR sync. After 3D mode is enabled, you can sync the
signal of 3D glasses with both built-in DLP Link and external 3D IR transmitter or close the
former and rely on the latter for 3D signal sync. Please remember:
• People with the following conditions should view 3D images with great care:
- Children under six years old
- Those with light sensitization disease, history of heart disease, or poor health
- Those experiencing physical fatigue or a lack of sleep
- Those under the inuence of drugs or alcohol
Under normal conditions it is safe to view 3D images. Some might feel uncomfortable. Please
refer to the guidelines publicized by the 3D alliance on 2008-12-10. Please take at least 5-15
minutes rest for every 30-60 minutes viewing.
Color Space
This function enables you to change color space of input signal. In most cases, you can select
Auto to adopt the color space automatically set by the projector. You can select one of the
following options to use specic color space instead:
Auto: The projector switches to valid color space by detecting input signal.
YPbPr: Set color space to ITU-R BT.601.
YCbCr: Set color space to ITU-R BT.709.
RGB-PC: Set color space to RGB with black set to 0, 0, 0 and white to 255, 255, 255 (for 8-bit
image).
RGB-Video: Set color space to RGB with black set to 16, 16, 16 and white to 235, 235, 235 (for
8-bit image) to correspond brilliance values with values dened in digital component standard.
Reset Display
Press “Yes” to reset all setting to default in Display OSD.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ LU9715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ LU9715 in the language / languages: English as an attachment in your email.

The manual is 17,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BenQ LU9715

BenQ LU9715 User Manual - German - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info