636236
13
Zoom out
Zoom in
Previous page
1/70
Next page
Preparing the camera for use 13
English
Preparing the camera for use
Use only the specified battery for the camera, and always turn off the camera
before removing the battery.
Charging the battery
The battery charge status affects the camera performance. To maximize the
performance and the battery life, fully charge the battery via a wall outlet (or a
computer), and then fully discharge it through normal use at least once.
To charge the battery via a wall outlet:
1. Turn off the camera.
2. Insert the battery into the camera.
3. Open the USB/HDMI port cover.
4. Connect one end of the USB cable to the
camera.
5. Connect the other end of the USB cable
to the power adapter.
6. Plug in the power adapter to a wall outlet. The battery will start charging
immediately.
A
To install the battery:
1. Release and open the battery/card cover (A).
2. Insert the battery in the correct direction by
matching the + - label on the battery slot (B).
3. Push the battery all the way down.
4. Close and lock the battery/card cover (D).
B
C
To r e m o v e t h e b a t t e r y :
1. Release and open the battery/card cover (C).
2. Pull the battery out.
3. Close and lock the battery/card cover (D).
D
LR100 UM - EN.book Page 13 Wednesday, May 30, 2012 9:16 AM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ LR 100 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ LR 100 series in the language / languages: English as an attachment in your email.

The manual is 9,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info